中文 English
Actuatic is a high torque, high accuracy, modular servomotor. It is specially designed for domestic robot joints by integrating DC motor, gear set, encoder and controller all together. Actuatic has speed, current and temperature feedback, uses high speed serial communication, and supports both joint and wheel mode. It is easy to configure, control and monitor a series of motors by using its control software – Actuatic MCS. Down Contact Us
Actuatic is a high torque, high accuracy, modular servomotor. It is specially designed for domestic robot joints by integrating DC motor, gear set, encoder and controller all together. Actuatic has speed, current and temperature feedback, uses high speed serial communication, and supports both joint and wheel mode. It is easy to configure, control and monitor a series of motors by using its control software – Actuatic MCS.
Down Contact Us
Product Name Actuatic
Weight 340g Range of Motion Joint Mode:0 ~ 360°
Size 69x44x74mm Wheel Mode:Continuous Revolution
Reduction Ratio 240:1 Operating Temperature -5 ~ 80°C
Voltage Supply 18 ~ 30 V
(Recommended: 24 V)
Monitoring Parameters Position, Speed, Current(Total, Phase), Voltage(Total, Phase), PWM, Temperature
Stall Torque 42 Nm Material Case:PA + Fiber Glass
Stall Current 10.8A Gears:Metal+Nylon
No Load Speed 57rpm MCU 32-bit
Motor Brushless DC Motor Baud Rate 9600 bps ~ 2.0 Mbps
Control Precision ~0.088° Encoder Non-contact 12-bit absolute encoder
Control Method PID Protocol Half-Duplex asynchronous serial communication(8N1),RS485
Product Name Actuatic
Weight 340g
Joint Mode: 0 ~ 360°
Wheel Mode: Continuous Revolution
Size 69x44x74mm
Reduction Ratio 240:1
Operating Temperature -5 ~ 80°C
Voltage Supply 18 ~ 30 V (Recommended: 24 V)
Monitoring Parameters Position, Speed, Current(Total, Phase), Voltage(Total, Phase), PWM, Temperature
Stall Torque 42 Nm
Case: PA + Fiber Glass
Gears: Metal+Nylon
Stall Current 10.8A
No Load Speed 57rpm
MCU 32-bit
Motor Brushless DC Motor
Control Precision ~0.088°
Encoder Non-contact 12-bit absolute encoder
Control Method PID
Protocol 半双工异步串行通信(8位,1停止,无奇偶校验)RS485
Baud Rate 9600 bps ~ 2.0 Mbps